YG-1 73422CC E2248 Center Cut Imperial Regular Length Roughing and Finishing End Mill, 1 in Dia Cutter, 2 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4-1/4 in OAL, TiCN Coated
YG1 73422CC
$126.74
/ EA
Out of Stock
- Mill Diameter: 1 in
- Pitch: Coarse
- Length of Cut: 2 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 4-1/4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Diameter: 1 in
- Diameter - Metric: 25.4 mm
- Flute Type: Rougher
- Length Type: Regular
- Number of Flutes: 5
- Overall Length - Fractional: 1/4 in
- Shank Type: Flat
- Diameter - Decimal: 1 in
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.