SGS 70470 7S Fractional High Performance Square End High Performance End Mill, 1/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 2-1/4 in OAL, TX Coated
SGS 70470
$23.95
/ EA
Out of Stock
- Centercutting: No Center Cutting
- Number of Flutes: 4
- Length of Cut: 3/4 in
- Material: Micrograin Solid Carbide
- Finish/Coating: TX Coated
- Shank Diameter: 1/8 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Overall Length: 1/4 in
- Cutting Direction: Right Hand
- Helix Angle: 38 deg
- Cutter Diameter: 1/8 in
- Cutter Diameter - Fractional: 1/8 in
- Diameter: 0.125 in
- Diameter - Decimal: 0.125 in
- Length of Cut - Fractional: 3/4 in
- Overall Length - Fractional: 1/4 in
- Series: 7S
- Shank Length: 1-1/2 in
- Shank Length - Fractional: 1-1/2 in
- Shank Type: Straight
- Type: Fractional High Performance Square End
- Flute Type: Spiral
- Finish: AlTiN
The series 7 end mill provides precision performance and high production rates without chatter. This is the tool that can deliver it all in long lengths of cut: chatter suppression, longer tool life, better surface finishes, reduced harmonics and improved side-wall straightness.
- Variable pitch fluting geometry suppresses chatter and produces better surface finishes
- Rigid construction minimizes deflection and increases part accuracy
- Optimized tool geometry increases tool life while strengthening all cutting edges
- Positive rake angle
- External coolant
- Flute spacing unequal
- Applicable materials: steels, stainless steels, cast iron, high temp alloys, titanium
- +0.0000/-0.0020 in D1, H6 D2 tolerances
Application: Aerospace, Medical, Power Generation, Automotive, Mold & Die, Castings & Foundries and General Engineering
SGS® High Performance End Mill | Extra Long Length Square End Variable Geometry | Series: 7 | 1/8 in Cutter Dia | 2-1/4 in Overall Length | 3/4 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated