SGS 37166 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 7/16 in Dia Cutter, 0.015 in Corner Radius, 7/8 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, AlTiN Coated
SGS 37166
$98.84
/ EA
Out of Stock
- Corner Radius: 0.015 in
- Number of Flutes: 5
- Material: Solid Carbide
- Length of Cut: 7/8 in
- Shank Diameter: 7/16 in
- Shank Diameter - Fractional: 7/16 in
- Shank Diameter - Metric: 14 mm
- Overall Length: 2-3/4 in
- Cutting Direction: Right Hand
- Helix Angle: 37 deg
- Cutter Diameter: 7/16 in
- Cutter Diameter - Fractional: 7/16 in
- Finish/Coating: AlTiN Coated
- Flute Type: Right Spiral
- Length of Cut - Fractional: 7/8 in
- Overall Length - Fractional: 2-3/4 in
- Series: Z-Carb-HPR Z5CR
- Shank Type: Straight
- Type: High Performance Non-Center Cutting Positive Rake Single End
- An ideal balance of helix, indexing, flute depth, rake and relief
- Variable indexing for chatter suppression and proprietary edge geometry for shearing and strength
- Chatter-free geometry allows deep cutting and high speed machining
- Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
- Enhanced corner geometry with tight tolerance corner radii
- Excels at roughing, ramping, high speed machining and finishing in a variety of materials
- Recommended for materials
- Unequal flute spacing
- Aluminum titanium nitride (AlTiN) coating - excellent thermal and chemical resistance allows for dry cutting and improvements in performance of carbide
- the coating has a high hardness giving great protection against abrasive wear and erosion
- 0.015 in corner radius
- Applicable on steel, stainless steel, cast iron, high temperature alloys, titanium and hardened steel
- -0.002 in cutting diameter tolerance
- H6 shank diameter tolerance
- -0.002 in corner radius tolerance
- Positive rake
SGS® End Mill | Corner Radius High Performance | Series: Z5CR Z-Carb-HPR | 7/16 in Cutter Dia | 2-3/4 in Overall Length | 7/16 in | 7/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 7/16 in Shank Dia | Right Hand Cutting | 37 deg Helix Angle | Z-Carbide | AlTiN Coated (Ti-Namite A)