OSG 1735501 EXOPIPE® 308 High Performance Pipe Tap, 15 deg Helix
- Finish/Coating: Steam Oxide
- Material: HSS-E
- Number of Flutes: 4
- Square Size: 0.626 in L x 0.515 in W
- Thread Length: 1.409 in
- Thread Size: 1/2-14
- Thread Standard: NPT
- Chamfer Type: 2.5P Plug
- Cutting Direction: Bottoming
- Helix Angle: 15
- Measurement System: Imperial
- Overall Length - Decimal: 3.12 mm
- Series: EXOPIPE® 308
- Shank Diameter - Decimal: 0.688 in
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses. EXOPIPE® is the premium high performance pipe taps for tapping stainless steels.
- Pipe taps are used to produce internal threads to meet a variety of standards
- HSS-E material increased wear-resistance
- Steam oxide surface treatment S/O increases mechanical lubricity
- NPT and NPTF for standard and dry seal tapered pipe thread applications
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG Pipe Tap | High Performance | Series: EXOPIPE 308 | Measurement System: Imperial | 1/2-14 | NPT | 15 deg Helix Angle | 2.5P Plug Chamfer | 1.409 in Thread Length | 3.12 in Overall Length | 4 Flutes | Bottoming Cutting | 0.688 in Shank Dia | 0.626 in L x 0.515 in W Square Size | HSS-E | Steam Oxide