OSG 1225405 105 General Purpose Spiral Point Gun Tap, Right Hand Cutting, 1/4-28 Thread, H2 Thread Limit, 3.5P-4.5P Plug Chamfer, 2 Flutes, TiN Coated, HSS
- Coolant Through: No
- Finish/Coating: TiN Coated
- Material: HSS
- Material Application: Steel, Stainless Steel, Tool Steel, Die Steel and Aluminum
- Number of Flutes: 2
- Overall Length: 2.5 in
- Shank Diameter - Decimal: 0.255 in
- Thread Length: 0.744 in
- Thread Limit: H2
- Thread Size: 1/4-28
- Thread Standard: UNF
- Chamfer Type: 3.5P-4.5P Plug
- Cutting Direction: Right Hand
- Measurement System: Imperial
- Overall Length - Decimal: 2.68 mm
- Point Type: Spiral
- Series: 105
- Diameter - Fractional: 1/4 in
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral point taps push chips forward
- HSS material increased wear-resistance
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Through Hole Applications
OSG Spiral Point Gun Tap | General Purpose | Series: 105 | Measurement System: Imperial | UNF | 1/4-28 | 3.5P-4.5P Plug Chamfer | 2 Flutes | HSS | TiN Coated | Right Hand Cutting | 0.744 in Thread Length | 2.68 in Overall Length | 0.255 in Shank Dia | Steel | Stainless Steel | Tool Steel | Die Steel and Aluminum Material Application | H2 Thread Limit | No Through Coolant (Yes/No)