Milwaukee® Steel Hawg® Threaded Hole Cutter, 2-1/16 in Dia, 2 in Carbide Bit

Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-1/16 in Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2 in hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee® 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee® 4292-1 mag press. The 2-1/16 in bit diameter has a metric thread size of M18 x 1.5 in shank. Use the Threaded Steel Hawg with a No. 3 Morse Taper Arbor Assembly 49-57-0010.

• Faster cutting-alternating tooth form geometry makes fast work of cutting steel
• Long life-abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut
• The steel hawg cutter works with most electromagnetic drill presses
• Features carbide teeth and an alternating cutting pattern to cut up to a 1 in hole depth in steel, stainless steel, cast iron or aluminum
• The steel hawg cutters' multiple cutting edges uniformly distribute cutting over a wider area than a two flute twist drill tip
• Accurate cuts-Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal
• Alternating inside and outside cutting edges are carefully honed to cut holes rapidly with great precision
• Hardened carbide-Last longer than regular twist drills
• For use with NO 3 morse taper arbor assembly 49-57-0012, 49-57-0013 and 49-57-0032
• 2 in Cutting depth
• 3/4 in Shank
• 7 Teeths
• Morse taper shank
• M18x1.5 Thread

Standard/Approvals: OSHA Approved, UL Listed

Milwaukee® Threaded Hole Cutter | Series: Steel Hawg® | 2-1/16 in Cutting Dia | 2 in Bit | Carbide Bit | Applicable Materials: Cast Iron | Mild Steel | Non-Ferrous Soft Metal | Soft/Medium Steel and Stainless Steel