Master STAGES™ WHAMEXXT/5 Whamex XT™ Machine Tool Sump/System Cleaner, 5 gal Pail

Master STAGES Whamex XT is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
• Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
• PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex XT into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES DF1 or TRIM TC 239, available during this process
• After the Whamex XT has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
• Spray down the machine with a 10%-15% Whamex XT and water solution using
• 10 at 2% Working Solution, 10.5 at 5% Working Solution pH range
• >200 deg F flash point
• 12 Months shelf life

General-Purpose Garden Sprayer, Scrub Out The Chips, Sludge, And Any Other Residues From All Interior, Exterior, Tool Changer Areas Including High-Pressure Sumps and Filter Canisters

WHAMEXXT/5 | Master Stages Machine Tool Sump/System Cleaner | 5 gal | Pail Container | Liquid Form | Straw Yellow | Slight Odor/Scent