Emuge 2869Az.0750 Square End Mills 3/4in Milling Dia, 1-1/8in LOC, 4in OAL, 3 Flutes, Carbide
EMUGE 2869AZ.0750
$558.05
/ EA
Out of Stock
- Mill Diameter: 3/4 in
- Mill Diameter - Fractional: 3/4 in
- Number of Flutes: 3
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 1-1/8 in
- Shank Diameter: 3/4 in
- Shank Diameter - Fractional: 3/4 in
- Overall Length: 4 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Coolant Through: No
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Cutting Direction: Right Hand
- Diameter: 3/4 in
- Diameter - Fractional: 3/4 in
- Extended Reach: Yes
- Finish: TiAlN Coated
- Flute Direction: Right Hand
- Length of Cut - Fractional: 1-1/8 in
- Length Type: Long Length
- Overall Length - Decimal: 4 in
- Series: Multi-Cut 2869AZ
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Flute Type: Spiral
- Diameter - Decimal: 0.75 in
- Type: High Performance
- Diameter - Metric: 19.05 mm
- Vibration dampening variable flute spacing
- Short flute length with an aggressive 45 deg helix angle
- NR fine roughing flute profile helps reduce vibrations and cutting force for optimum performance
- PVD applied TiAlN coated for wear and heat resistance
- Coolant fed (axial) construction
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For high performance roughing operations and maximum metal removal rates
Emuge Square End Mill | Standard Length | Series: Multi-Cut 2869AZ | 3/4 in Cutter Dia | 4 in Overall Length | 1-1/8 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated