Emuge 1828A.0375 Square End Mills 3/8in Milling Dia, 1-3/8in LOC, 3-1/4in OAL, 6 Flutes, Carbide
EMUGE 1828A.0375
$188.26
/ EA
Out of Stock
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Chamfer Length: 0.004 in
- Number of Flutes: 6
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 1-3/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Fractional: 3/8 in
- Overall Length: 3-1/4 in
- Centercutting: No Center Cutting
- Helix Angle: 50 deg
- Coolant Through: No
- Cutter Diameter: 3/8 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Fractional: 3/8 in
- Extended Reach: No
- Flute Direction: Right Hand
- Length of Cut - Fractional: 1-3/8 in
- Length Type: Long Length
- Overall Length - Fractional: 3-1/4 in
- Series: Hard-Cut 1828A
- Shank Type: Cylindrical
- Single or Double End: Single End
- Type: Hard Cut
- Flute Type: Spiral
- Cutter Diameter - Fractional: 3/8 in
- Diameter - Metric: 9.525 mm
- Hard-Cut series of carbide end mills is specifically developed for machining hardened materials (up to 66 Rc)
- Well suited for the die and mold industry and are manufactured with extremely tight tolerances
- Multi-flute - 6, 8 and 10 flute construction for hard milling
- Premium sub-micro grain carbide substrate
- TiAlN coated for heat and wear resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For roughing applications
Emuge Square End Mill | Extra Length | Series: Hard-Cut 1828A | 3/8 in Cutter Dia | 3-1/4 in Overall Length | 1-3/8 in Maximum Depth of Cut | 6 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 50 deg Helix Angle | Cylindrical Shank | Carbide | TiAlN Coated