CARLAN H-20-4-.1875, 1144 Stressproof Steel, 5/16 in, 0.1875 in, Head Press Fit Bushing

H Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole.

CARLAN H-20-4-.1875 | Carr Lane Head Press Fit Bushing | 0.1875 in Inside Diameter | 5/16 in Outer Diameter | 3/8 in Width | 1/4 in Length | 1144 Stressproof Steel