Proto® JRR07523 SAE Retaining Ring, 3/4 in Drive, 1-5/8 in OAL, 1-7/16 in Dia Groove, 1.63 in Dia Hub, Steel, Red

• Retaining rings are used to help secure sockets onto drive tools
• They are not intended to bear any load
• The rotational forces are between the drive tool and the socket
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
• Drive tool and socket should line up when in use and should not pinch the crush gauge
• Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other
• One-piece construction, no loose parts
• Part numbers are embossed on the rings near the point at which the pin and ring meet
• Pin is made of resin which allows the material to compress without breaking
• This action pinches the small fin or the crush gauge on these retaining rings
• If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced

Production, Industrial and Professional

Warranty: Lifetime Limited

Proto® Retaining Ring | SAE | For Use With: 3/4 in Drive Impact Sockets | 3/4 in Drive | 1-5/8 in OAL | 1-7/16 in Dia Groove | 1.63 in Dia Hub | Steel | Plastic Coated | Red | 0.187 in H x 1.6245 in W | STA-BLKHAW