Brady® ToughStripe® 104439 Laminated Floor Corner Mark, 2 in W x 5 in L, 2 mil THK, Solid, Yellow

• B514 is a surface printed polyester with a rigid, clear polyester overlaminate
• Permanent rubber based adhesive
• 0.008 in Thk material
• Abrasion and chemical resistant
• ToughStripe® T corner marks are made of the most durable floor marking tape
• ToughStripe® are perfect for marking skid and pallet storage areas, as well as other designated areas of your facility
• Compared to conventional floor marking tape, the ToughStripe® T corner marks are less likely to be damaged when skids are dragged into their position, as there is less tape on the floor
• ToughStripe® are easier to repair and make changes - there is no need to pull up and replace an entire line of floor tape
• ToughStripe® T corner marks are made of tough, resilient material so you can spend less time replacing damaged or worn corner marks
• Withstands forklift traffic without tearing or lifting
• Low profile design minimizes tears and scratches from skids, pallet jacks, etc
• Made with rugged polyester and aggressive adhesive
• ToughStripe® T corner marks can be easily removed without damaging the floor or leaving residue
• Does not chip and flake when being removed - comes off in one-piece
• Clean removal without any unsightly adhesive residue or damage to the floor
• ToughStripe® T corner marks offer the same visibility as painted floor markings, but cost much less
• High gloss surface shines like new paint
• Low profile minimizes debris buildup along the edges that occurs with thicker (extruded) floor marks
• Surface resists marks and smudges and cleans up like new

Standard/Approvals: ASTM/ANSI F1679, ANSI A1264.22006, OSHA 1910.22, ASTM D2979, PSTC33, PSTC101

For use to mark aisles, passageways, storage locations and point out safety equipment and exits

Brady ToughStripe Floor Corner Mark | Laminated | Yellow | Solid Pattern | 2 in Width | 5 in Length | 2 mil Thickness | B-514 Polyester | 0 to 130 deg F