Emuge 2887A.0625 Square End Mills 5/8in Milling Dia, 1-1/4in LOC, 3-1/2in OAL, 16 Flutes, Carbide
EMUGE 2887A.0625
$471.71
/ EA
Out of Stock
- Mill Diameter: 0.625 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.875 mm
- Number of Flutes: 16
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 1.25 in
- Shank Diameter: 0.625 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Overall Length: 3.5 in
- Centercutting: No Center Cutting
- Helix Angle: 40 deg
- Coolant Through: No
- Cutter Diameter: 5/8 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Flute Direction: Right Hand
- Flute Type: Spiral
- Length of Cut - Decimal: 1.25 in
- Length of Cut - Fractional: 1-1/4 in
- Length of Cut - Metric: 31.75 mm
- Overall Length - Decimal: 3.5 in
- Overall Length - Fractional: 3-1/2 in
- Overall Length - Metric: 88.9 mm
- Series: Jet-Cut 2887A
- Shank Type: Cylindrical
- Single or Double End: Single End
- Cutter Diameter - Fractional: 5/8 in
- Jet-Cut/hard metal carbide end mills are designed to mill hardened materials (44 -66 Rc)
- High metal removal rate combined with the best possible surface quality
- From 6 to 20 flute options for reduced vibration cutting
- Tighter manufacturing tolerances on cutting diameter
- TiAlN coated for heat and wear resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For finishing applications
Emuge Square End Mill | Multi-Tooth | Series: Jet-Cut 2887A | 5/8 in Cutter Dia | 3-1/2 in Overall Length | 1-1/4 in Maximum Depth of Cut | 16 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 40 deg Helix Angle | Cylindrical Shank | Carbide | TiAlN Coated