Emuge

Emuge 2648Tz.0500 Square End Mills 1/2in Milling Dia, 1-1/8in LOC, 3-1/4in OAL, 4 Flutes, Carbide

EMUGE 2648TZ.0500
$197.25 / EA
Out of Stock
Emuge 2648Tz.0500 Square End Mills 1/2in Milling Dia, 1-1/8in LOC, 3-1/4in OAL, 4 Flutes, Carbide
  • Mill Diameter: 0.5 in
  • Mill Diameter - Decimal: 0.5 in
  • Mill Diameter - Fractional: 1/2 in
  • Mill Diameter - Metric: 12.7 mm
  • Number of Flutes: 4
  • Material: Carbide
  • Finish/Coating: TiN / TiAlN
  • Length of Cut: 1.125 in
  • Shank Diameter: 0.5 in
  • Shank Diameter - Decimal: 0.5 in
  • Shank Diameter - Fractional: 1/2 in
  • Shank Diameter - Metric: 12.7 mm
  • Overall Length: 3.25 in
  • Centercutting: No Center Cutting
  • Helix Angle: 45 deg
  • Coolant Through: Yes
  • Cutter Diameter: 1/2 in
  • Cutting Direction: Right Hand
  • Extended Reach: Yes
  • Flute Direction: Right Hand
  • Length of Cut - Decimal: 1.125 in
  • Length of Cut - Fractional: 1-1/8 in
  • Length of Cut - Metric: 28.575 mm
  • Overall Length - Decimal: 3.25 in
  • Overall Length - Fractional: 3-1/4 in
  • Overall Length - Metric: 82.55 mm
  • Series: TiNox-Cut 2648TZ
  • Shank Type: Cylindrical
  • Single or Double End: Single End
  • Flute Type: Spiral
  • Cutter Diameter - Fractional: 1/2 in
  • The TiNox-Cut series was especially developed for machining titanium alloys and nickel based alloys along with stainless steel
  • Vibration dampening with variable flute spacing
  • Heat and wear resistant multi-layer TiN/TiAlN - PVD coating
  • Semi-finishing roughing flute profile for optimum performance
  • Coolant fed (axial) design for efficient chip evacuation
  • Tool shanks are held to h5 tolerance and have a roughened surface (non-polished) for greater gripping force
  • Machining of difficult to cut materials

Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer

For roughing and finishing applications

Emuge Square End Mill | Standard Length | Series: TiNox-Cut 2648TZ | 1/2 in Cutter Dia | 3-1/4 in Overall Length | 1-1/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Cylindrical Shank | Carbide | TiN/TiAlN Coated

QTY
Add to List