SGS 33106 L1B Ball Nose End Long Length Fractional End Mill, 5/16 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 3 in OAL, Uncoated
SGS 33106
$38.65
/ EA
Out of Stock
- Mill Diameter: 0.3125 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.94 mm
- Number of Flutes: 4
- Length of Cut: 1.125 in
- Material: Carbide
- Overall Length: 3 in
- Shank Diameter: 0.3125 in
- Shank Diameter - Decimal: 0.3125 in
- Shank Diameter - Fractional: 5/16 in
- Shank Diameter - Metric: 7.94 mm
- Finish/Coating: Uncoated
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 5/16 in
- Cutter Diameter - Fractional: 5/16 in
- Cutting Direction: Right Hand
- Extended Reach: No
- Flute Direction: Right Hand
- Length of Cut - Decimal: 1.125 in
- Length of Cut - Fractional: 1-1/8 in
- Length of Cut - Metric: 28.58 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: L1B
- Shank Length: 1-7/8 in
- Shank Length - Fractional: 1-7/8 in
- Shank Type: Straight
- Type: Ball Nose End Long Length Fractional
- Flute Type: Spiral
SGS general purpose end mills are manufactured to the highest standards on state of the art CNC equipment. Held to the same standard as high performance product, the SGS general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.
- Solid carbide provides better rigidity than high speed steel
- It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials
- Lab inspected and certified raw material
- Precision CNC ground to industry leading specifications
- Consistent quality and predictable performance
- Positive rack angle
- External coolant
- Applicable materials: steels, stainless steels, cast iron, titanium, non-ferrous and plastic/composites
- +0.000/-0.002 in D1, H6 D2 tolerances
Application: Aerospace, Medical, Power Generation, Automotive, Mold & Die, Castings & Foundries and General Engineering
SGS® End Mill | Ball End Center Cutting General Purpose Long Length Single End | Series: 1LB | 5/16 in Cutter Dia | 3 in Overall Length | 1-1/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/16 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | Uncoated