CARLAN H-176-60-2.000, 1144 Stressproof Steel, 2-3/4 in, 2 in, Head Press Fit Bushing

H Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole.

CARLAN H-176-60-2.000 | Carr Lane Head Press Fit Bushing | 2 in Inside Diameter | 2-3/4 in Outer Diameter | 3/8 in Width | 3-3/4 in Length | 1144 Stressproof Steel