Dixon DM1 Hose Mender, 1/2 in, Hose Shank, Steel, Domestic

• Hose mender for repairing hoses
• Connects to a hose on both ends
• Zinc plated steel for greater corrosion resistance than unplated steel
• Barbed fitting for a tight seal on hoses
• Not for compressible products such as air, nitrogen, or steam
• For use with a hose clamps or crimp sleeve or ferrule
• Menders are not for compressible products such as air, nitrogen or steam
• The working pressure may vary with the construction of the hose, the type of clamping system used and the application
• In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Application:
Air Compressors, Automatic Manufacturing Operations, Aircraft Controls and Tire Installation in Industries

Dixon Hose Mender | Fitting/Connector Type: Mender | 1/2 in Nominal Size | Hose Shank | 3 in Length | Steel | Zinc Plated | 17/32 in Dia | Domestic