Standard Abrasives™ Quick Change Ceramic 2 Ply Disc, 595414, 50, TR, Red, 2 in, Die Q200P, 50/Carton, 200 ea/Case

Our Standard Abrasives™ Quick Change Ceramic 2-Ply Disc is a multi-purpose disc designed to tackle many phases of a project, from stock removal to cleaning and finishing. Full ceramic grain cuts cooler and achieves a fast cut under heavy pressure. This disc is well-suited for use on stainless steel and high nickel alloys, and the quick change attachment enables secure use at high speeds. Spanning Many Industries From aircraft maintenance to automotive repair to agricultural equipment manufacturing, this Standard Abrasives™ Ceramic Disc spans industries; its versatile uses are applicable to most trades. For example, Standard Abrasives™ Ceramic Disc's durability makes it a good match for heavy deburring and removal of weld spatter, parting lines and die cast flash. Moreover, the tough, sharp ceramic mineral that coats the abrasive is great for removing corrosion, paint coatings, gaskets, adhesives and rust from metal surfaces. Durable, Stiff, Won't Deflect One of the key reasons Standard Abrasives™ Ceramic Disc is so versatile is because it comes in a range of grades. Users typically opt for a smoother grade during cleaning and finishing; they choose rougher grades for tough applications like blending and deburring. All ceramic discs have a Y weight backing – one of the most durable cloth backings. Heavy and stiff, the backing helps the abrasive stand up to heavy stock removal. One of the reasons the disc works so well on flat surfaces is because the backing will not yield to or deflect on the substrate. These discs are 2 ply or "double thickness," falling right between single and triple ply abrasives. The extra thickness adds rigidity and durability without totally compromising abrasive flexibility. Rapid Stock Removal with Ceramic Abrasive Grain The Standard Abrasives™ Quick Change Ceramic 2-Ply Disc is constructed with ceramic abrasive for rapid stock removal on high-pressure applications. Ceramic abrasives are engineered with high levels of hardness and strength so they can cut fast and handle intense heat and stress applications. They perform best under high pressure. Our ceramic 2-ply disc features 100% ceramic grain for long-lasting durability. This 2-ply disc has a resin-reinforced X-weight cloth backing that readily stands up to the demands of grinding and deburring. It is slightly more flexible than a 3-ply disc and well-suited for flat surfaces. Grinding Aid When it comes to working with stainless steel and high nickel alloys, a sharp abrasive increases efficiency. This ceramic 2-ply disc features a grinding aid that improves the grinding performance on corrosion-resistant alloys. This helps prevent glazing of the disc, in turn enhancing cut and prolonging disc life. Moreover, this added cut efficiency helps reduce loading, part discoloration and follow-up steps. Quick Change Convenience This disc is available in a range of sizes, grits and quick change sanding systems. Quick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications. Choose the disc compatible with your TP, TR, TS or TSM holder pad. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded hub that easily mounts to TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS system has a metal hub that attaches to its holder pad with a simple twist. The TSM attachment features an asymmetrical metal hub that twists onto most asymmetrical hub holder pads. Quality Standard Abrasives™ Solutions for Industrial Applications Altogether, the Standard Abrasives™ Ceramic Disc combines the most durable elements – including sharp ceramic mineral, a heavy cloth backing and a double thickness – to yield a very tough and durable abrasive. When seeking a disc that can champion heavy-duty applications, the Standard Abrasives™ Ceramic Disc is a good choice. The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on the broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

• Contains ceramic grain for more efficient stock removal over aluminum oxide or zirconia abrasives
• Excellent choice for rapid stock removal on stainless steel and high nickel alloys
• X-weight 2-ply backing adds stiffness and extends performance life for high-pressure applications
• Grinding aid improves grinding efficiency on stainless steel, which helps prevent discoloration of the substrate and increases disc performance and longevity
• Choose from TP, TR, TS or TSM quick change attachment styles